Products

Low Intensity Light Type B Dual Light-Style#SPL-016
2019-04-21
Medium Intensity Light Type B-Style#SPL-013
2019-04-21
Show all

Low Intensity Light Type B-Style#SPL-015

Characteristics of Lamp

  1. Corrosion resistance, anti-ultraviolet.
  2. International advanced cold light source, low power consumption, high brightness, the service life is up to 100000 hours.
  3. …

Product Specification

Categories: ,

1. Technical Parameters

1.1 Dimensions (mm)

1.2 Technical Parameters

The following parameters are obtained under normal temperature test. (25℃)

Item of Test Parameters
Model

 

 SPL-015
Structure Parameter Nominal Dimension Φ104×175mm
Installation Dimension SEE BELOW
Material of Lamp Panel Aluminum Die Casting
Material of Cover PC
Electrical Parameter Rated Power ≤8W
Input Voltage IN：AC220±20% 50/60Hz

OUT：DC9~10V  850AM±10%
Light source LED
Light color RED
Effective light intensity(cd) 32
Operating mode Operating mode    Steady burning
Function XB-L810(L) low intensity obstruction light type B is a red fixed light, to mark the outline of the building, to alert the pilots. It can be used independently when structures are less than 45m, when structures are more than 45m, medium/high intensity obstruction lights are required.
Other Parameter Operating tem. -40～+55℃
Wind load① 80m/s
Protection IP66
Weight 0.8Kg

2. Characteristics of Lamp

  1. Corrosion resistance, anti-ultraviolet.
  2. International advanced cold light source, low power consumption, high brightness, the service life is up to 100000 hours.
  3. The use of PC material, designed for impact resistance.
  4. With lightning protection function.
  5. This product is self-developed, with self-patent for optics and new product experiment;
  6. The housing adopts integrated die-casting aluminium, with super performance of heat sinking and sealing;
  7. The optical module of this product adopts reflex housing, high efficiency of light gathering, no extra scattered light pollution;

3. Installation

3.1 Schematic Diagram

3.2 Instruction

a) Please read carefully the product specification before using the driver to make sure the operation environment can meet the requirement as per the specification.

b) While connecting the tube to the power, please make sure the switch is “OFF”.

c) Do not disassemble the lamp by yourself.

4. Maintenanc

4.1 keep every screw in tight

4.2 keep the light OFF when not using

5. Standard

5.1 Low intensity light type B, International Civil Aviation Organization, annex 14, volume 1, 7th edition, “airport design and operation”, July 2016, table 6.3.