Heliport Surface Mounted Perimeter Lighting -Style#SPL-019
2019-08-16Perimeter light-Style#SPL-004
2019-10-07
Low Intensity Obstruction Light Style#SPL-014
Characteristics of Lamp
- Corrosion resistance, anti-ultraviolet.
- International advanced cold light source, low power consumption, high brightness, the service life is up to 100000 hours.
- The use of PC material, designed for impact resistance.
Product Description
1 Technical Parameters
1.1 Dimensions (mm)

1.2 Technical Parameters
The following parameters are obtained under normal temperature test. (25℃)
Item of Test |
Parameters |
Model
|
SPL-0014 |
Structure Parameter |
Nominal Dimension
|
162mm x 146mm x 149mm |
Installation Dimension |
84-100*4(M12) |
Material of Lamp Panel
|
Aluminum Die Casting |
Material of Cover
|
PC |
Electrical Parameter电性参数 |
Rated Power
|
7W |
Input Voltage
|
AC 100-250V |
Light source |
LED |
Light color |
RED |
Effective light intensity(cd) |
≥5 |
Operating mode
|
Operating mode |
Steady burning |
Function
|
low intensity obstruction light is a red fixed light, to mark the outline of the building, to alert the pilots. It can be used independently when structures are less than 45m, when structures are more than 45m, medium/high intensity obstruction lights are required. |
Other Parameter其它参数 |
Operating tem.
|
-40~+55℃ |
Wind load①
|
60m/s |
Protection
|
IP66 |
Weight |
1.8Kg |
- Characteristics of Lamp
- Corrosion resistance, anti-ultraviolet.
- International advanced cold light source, low power consumption, high brightness, the service life is up to 100000 hours.
- The use of PC material, designed for impact resistance.
- With lightning protection function.
- This product is self-developed, with new product experiment;
- The housing adopts integrated die-casting aluminium, with super performance of heat sinking and sealing;
- The optical module of this product adopts reflex housing, high efficiency of light gathering, no extra scattered light pollution;
- Installation
3.1 Schematic Diagram

3.2 Instruction
- a) Please read carefully the product specification before using the driver to make sure the operation environment can meet the requirement as per the specification.
- b) While connecting the tube to the power, please make sure the switch is “OFF”.
- c) Do not disassemble the lamp by yourself.
- Maintenance
4.1 keep every screw in tight
4.2 keep the light OFF when not using