Products

Medium Intensity Light Type B-Style#SPL-013
2019-04-21
High Intensity Light Type A-Style#SPL-010
2019-04-21
Show all

High Intensity Light Type B-Style#SPL-011

Characteristics of Lamp

  1. Low power consumption, professional flash switch.
  2.  With lightning protection function.
  3. This product is self-developed, with self-patent for optics and new product experiment;
  4. …

Product Specification

Categories: ,

1 .Technical Parameters

1.1 Dimensions (mm) 

1.2 Technical Parameters 

The following parameters are obtained under normal temperature test. (25℃)

Item of Test Parameters
Model SPL-011
Structure Parameter Nominal Dimension 389×285×360mm
Installation Dimension SEE BELOW
Material of Lamp Panel Aluminum Die Casting
Material of Cover PC
Electrical Parameter Rated Power ≤28W
Input Voltage AC176V-264V
 

Optical Parameter

 Light intensity Background brightness Light intensity
＞500cd/㎡ 100000±25%
50～500 cd/㎡ 20000±25%
＜50 cd/㎡ 2000±25%
Light source LED
Light color White
Operating mode Operating mode 40-60 flashes/min(adjustable)
Function Aviation obstruction light belongs to airfield ground light product, this product is “High intensity obstruction light type B”, it is widely used in airfield clearance zone, airfield course sector, power tower and obstructions more than 60m, can assist pilots to visualize the physical size of the obstruction, to ensure safety flight.
Other Parameter Operating tem. -40～+55℃
Wind load① 60m/s
Protection IP66
Weight 8.5Kg

 

2.Characteristics of Lamp

  1. Low power consumption, professional flash switch.
  2.  With lightning protection function.
  3. This product is self-developed, with self-patent for optics and new product experiment;
  4. The housing adopts integrated die-casting aluminium, with super performance of heat sinking and sealing;
  5. The optical module of this product adopts reflex housing, high efficiency of light gathering, no extra scattered light pollution;
  6. This product is 90° at horizontal azimuth, adjustable at vertical angle;
  7. This product adopts high power Led light source, can operate continuously over 50000H, energy saving, environment protection, long life;
  8. This product has AC power supply, high power constant current output, assure life stability;
  9. This product is controlled by a box or NON-box GPS, etc., have synchronized flash, sequentially flash, etc.
  10. This product can switch to different brightness levels by background LUX with built-in photocell;
  11. This product have local & remote feedback & control function, which is based on 485 two-way or wireless communication if needed;
  12. This product is equipped solo with “anti direct lighting” and “anti inductive lighting” to assure lighting proof capability;
  13. Mounting bracket, lighting rod, fastening, etc., all adopt 304 stainless steel, high intensity, light weight, anti corrosion.

3.Installation

3.1 Schematic Diagram

3.2 Instruction

a) Please read carefully the product specification before using the driver to make sure the operation environment can meet the requirement as per the specification.

b) While connecting the tube to the power, please make sure the switch is “off”.

c) Do not disassemble the lamp by yourself.

 

4.Maintenance 

4.1 keep every screw in tight

4.2 keep the light OFF when not using

 

5. Standard

5.1 High intensity light type B aviation obstruction light, International Civil Aviation Organization, annex 14, volume 1, 7th edition, “airport design and operation”, July 2016, table 6.3.